You’ve decided to remodel your home. Now comes the time to start thinking about plumbing issues. Before you begin a project, what should you do?
Plumbing problems are common during home remodeling. Planning ahead might save you from costly surprises in the future. Before you start any major renovation, make sure you’ve done all the necessary plumbing work. This includes fixing leaks, replacing pipes, and installing new fixtures.
Here are eleven things you should consider before you start remodeling your home.
1. Fix Leaks Before You Start
If you’re planning to remodel your home, you’ll need to fix leaks first. It’s easy to forget about small leaks when you’re focused on other aspects of the project, but they can add up quickly.
Running water into your house during remodeling is common. However, you should always fix any leaks before you start. It would be best for you to take care of the leak as soon as possible.
Having a small leak now might result in a larger problem later on. If you have a leak in your home, you may be able to find it with the help of some leak detection services. It is likely that you will have a leak in your water supply line when remodeling your kitchen.
You should also look for a leak in the water heater and any other areas in your house. Once you’ve found the leaks, you should fix them. This includes replacing the damaged pipes.
If you notice any signs of water leakage, such as wet carpet or mold growing in your bathroom, call a professional plumber immediately. It will be possible for them to find the source of the leak and fix it before the situation becomes more serious.
2. Check Your Water Lines and Valves
Once you’ve fixed the leaks, you should check the water lines and valves. This includes the water meter, the water spigot, and the valves on your water heater. Make sure that all of your water lines are properly attached and that the valves are in good working order.
Many homeowners fail to do this. When you start remodeling your home, you should mark the lines. You should also disconnect the water lines from the spigot so they aren’t lost.
You should replace broken water supply pipes if you have an older home. You should also replace any valves that are damaged or sticking. If you’re remodeling your bathroom check if there is any toilet or sink leaks to be fixed.
3. Replace Broken Plumbing Fixtures
If any of your home’s fixtures are damaged or worn out, you should replace them before you begin remodeling. Fixtures like faucets, bathtubs, or bidets should also be replaced as well.
A failing faucet, leaky pipe, or corroded fixture can lead to costly water damage later on. So it is good to replace them while you remodel your home.
4. Clear Any Blockages in Your Drains
Clear any obstructions in your drains while remodeling your home. This applies to the sprinkler system, sinks, and toilets. A water backup could happen if your drain is blocked. Your home can possibly endure damage as a result. To prevent future issues with your drains, make sure to keep them clean by flushing them regularly.
If you have any obstructions in your drains, get them removed as soon as possible to avoid sewage backup and water damage. You can also use a drain cleaner. Clear any clogs in your sprinkler system. When you’re done, you can leave a little water in the sprinkler system. This will help to keep it clear.
In this case, you may need to enlist the support of professionals. But make sure you get a free second opinion on trenchless sewer repair in Dallas to make sure you’re getting the best pricing.
5. Repair Any Damaged or Worn Piping
While you are remodeling your home, take into account fixing any worn or broken pipe systems. An inspection of the heat exchanger and the main water line is essential. It also includes the pipes that lead to your water heater from your water meter.
If you notice any damaged or worn piping systems, you need to repair them before you start any other renovations. Because these systems move water throughout the house, they are important. If they aren’t functioning properly, then you could end up with flooding issues.
6. Check Your Water Filters
Checking your water filters is a good idea when you begin house remodeling. This includes the filters on your refrigerator. Ensure that the filter in your refrigerator is clean.
Check that the hot and cold water coming from your faucets are both at the proper temperature. To prevent costly damages, fix if there are any issues as soon as possible.
Make sure that all of your water filters are in good working order and that they have been recently replaced if needed. It’s important to install a water filter when remodeling your home because it helps protect against bacteria and other contaminants.
A properly functioning filter is essential to making sure cold water runs efficiently. If your water filter contains sediment, you should clean it. This can be accomplished by running some cold water through the filter.
7. Adjust Your Water Pressure
People often forget to check their water pressure when remodeling their homes. This can sometimes create bigger issues hence it’s crucial to pay attention before you start remodeling. If you notice that your water pressure is low or fluctuating, get it fixed as soon as possible to prevent further damage.
By slowly turning on the water after opening a faucet, you can do this. During the process of running the water, you should also adjust the water pressure. The best time to do it is while the water is still cold. This will prevent your pipes from being damaged.
8. Check for Water Damage
As you remodel your home, make sure you check for signs of water damage. A leak can occur in any part of the house, including walls, floors, or ceilings. Make sure you check your crawlspace and basement as well.
Walls and floors covered in carpet can sometimes be difficult to notice. You should look underneath the carpet and confirm if you need any fixing. Water damage can harm your property badly so it’s good to thoroughly inspect your home to avoid expensive repairs.
Make sure your roof is free of leaks as well. This area is often overlooked when people think about fixing their homes, but it can cause serious damage if not fixed correctly.
9. Replace the Sink and Faucet
Most owners avoid changing their sinks & faucet when they renovate their homes to save money. However, this could later become more expensive particularly if the sink or faucet is old and cause you to change the whole piping system.
If you plan to replace the sink and faucet in your kitchen, make sure you replace them with high-quality products. You should also consider replacing the pipes as well.
You can buy new faucets and kitchen sinks for less than $300. If you fix these while remodeling your home, you can avoid paying for the plumber again. This can help you save money as well as time.
10. Fix the Drain Line
If you plan on doing some major renovations to your bathroom, kitchen, or another part of your home, you’ll need to fix the drain line first. It’s easy to forget about these lines when you’re focused on the rest of the project, but they’re very important. They carry water away from your sink, tub, shower, toilet, and more.
Sometimes it’s hard to check if your sewer line is under a concrete slab. You might need to get help from a professional to inspect if there is any sign of damage and quickly fix it.
11. Check Sump Pump Failure
A sump pump is an unexpected life-saver at times, but it can also be very frustrating. If your sump pump system fails in the middle of a flood, then you will see just how much you rely on it to keep your basement dry.
Sump pumps can last longer, although accidents do happen. If you want to avoid the unpleasant feeling of seeing that puddle of water forming underneath your basement floor or in the corner of your garage, you should make sure to do some maintenance to your sump pump while remodeling your home.
Every homeowner has a sump pump that they rely on to protect their basement from flooding. Since they are mechanical devices, there is always the possibility that they need maintenance. Sometimes, just cleaning and lubricating a sump pump motor will keep it running efficiently for several more years.
Conclusion
Remember when you start remodeling your home, you should always check your plumbing system. This includes your water lines and your valves. You should also make sure that your pipes aren’t damaged or worn.
If you follow the tips you just learned and other killer plumbing tips, you’ll save a lot of time and money over the long run. You’ll also avoid any plumbing problems during the home renovation process.
Salman is a prolific environmental writer, and has authored more than 500 articles in reputed journals, magazines and websites. He is proactively engaged in creating mass awareness on renewable energy, waste management, sustainability and conservation all over the world.
Salman can be reached on salman@cleantechloops.com
- Digital Detox: How a Screen-Free Hour Can Transform Your Day - November 20, 2024
- How to Get the Most Out of Your Signal Booster? - November 20, 2024
- 4 Tips to Finding a Home in Sea Pines - November 19, 2024